Porsche Cup - (Close to Box Stock Class)

Donate Via Paypal and Help Support this site.

   

[Russ]

Rules (updated 1/22/20) And will be updated as we figure this out

Chassis:

• MR-03-N RM
• 90mm wheelbase
• Ready Set: - Kyosho MINI-Z MR03 Porsche 911 GT3 RS/RM.
• RWD Part Numbers 32321W-B, 32321OR-B, 32321S-B (these are the white, lava orange and silver).
  
• Sports 2 Part Numbers 32231OR-B, 32231S-B (these are the lava orange and silver, not sure about white).

Radio:

• Ready Set included transmitter only, no upgraded radio's

• Perfex KT-531P FHSS 2.4GHz
• Perfex KT-19 FHS 2.4GHz

Body:

• Porsche 911 GT3 Autoscale Only
• Mirrors may be removed (on purpose or accidentally ).
• Stickers and decals for the body allowed and encouraged.
• Headlight Kit - MZW429R Not Required but highly recommended <--- Freakin Cool!!
• Taping body on for racing is allowed.

Suspension:
   Front

• No front suspension modifications. May clean and polish parts.
• Stock front springs, arms, holders
• Stock plastic knuckles, or aluminum Kyosho (R246-1310) 0 camber allowed.
• Stock king pins, in stock configuration, no reversed king pins etc.

   Rear

• Stock T-Plate, or PN Carbon T-Plate #4 Medium Soft (MR3006).
• Stock plastic motor pod
• Stock rear shock and spring
• No damper plates.
  
• No side springs

Tires:

• Front Tire PN X-15 (RXF15).
• Rear Tire PN KS Medium (KS2828).
• Taping allowed
• Truing Allowed
• No Sauce or Additives
• Tires may be cleaned with a 70% alcohol solution

Wheels:

• Stock or aftermarket plastic only.
• No aluminum wheels.
• Aluminum wheel nuts ok.
• Front wheels - Narrow +1-1.5 offset (stock is +1.5). Max 8.5mm width.
• Rear wheels - Wide +0 offset. Max 11mm width.
• Bearings - Stock or PN600129 - No ceramic - Cleaning and re-lubricating ok.

Batteries:

• Four (4) AAA size batteries.
• Alkaline, Ni-MH or Ni-Cd batteries.
• No other type of battery may be used.

Motor and Gearing:

• Kyosho MZ9P Motor from RTR.
• Motors are to be run as is, any tampering with the motor will result in disqualification. If any race official suspects motor tampering, the driver will be subject to disqualification.
• Fixed gearing: Stock 43 tooth gear diff.
• 6 tooth pinion for small track (≥ 2 wide L).
• 7 Tooth Pinion for  large track (≤ 2 wide L) Ice Melter Race.

ESC:

• Stock Board FHSS or FHS 2.4GHz.
• No Gyro's.

Other rules: TBD - The spirit is to keep the car box stock.

briankstan
Russ
Ryan
Chad
CLODGUY
wild child
benihanna80
trackstar

Utah RC Forums

Mini-Z Forums

  RCP Race Tracks

Mini-Z Racing Venues

Salt Lake Mini-Z Online Store