MR-02MM on the way..First upgrades?

Donate Via Paypal and Help Support this site.

   

[Russ]

Definately get some tires first. For $50 to start I would get 2 pairs rears PN RRR06 work great. Then I would get some fronts. I like RRF08 radials or RSF06 slicks but others like a little harder tire for a bit of push so get a couple to try out and see what you like. Then I would definately get some bearings. I like the (PN 600120 $8.95) cheapie's myself but you have to clean them out good. I run mine dry. You can polish your stock king pins and that works great. You might want to get a spring set for the front, they are cheap and can help tune the car to your likeing. I like the low down kind (MR2090) for a little front droop. 

So to break it down (in my opinion of importance) for $50 or less:

1. Tires 2 front 2 rear = $15.96
2. Bearings $8.95
3. King pins polish $free (if you have the polish and a drill or dremel)
4. Springs $5.99 (I have a set of low down springs for $5 brand new if interested)
5. Wheel nuts $3.99 (not necessasary but nice to have)
6. T-Plates Set $11.95 (PN MR2023)(not necassary but nice to have)
Total $46.84 plus tax or shipping, less discount?.

Next steps would usually be something like:
1. Differential
2. Disc Damper
3. Motor Pod
4. PN70t motor

briankstan
Russ
Ryan
Chad
CLODGUY
wild child
benihanna80
trackstar

Utah RC Forums

Mini-Z Forums

  RCP Race Tracks

Mini-Z Racing Venues

Salt Lake Mini-Z Online Store